|
Input
Specifications
|
|
Voltage
Range |
See
table below |
|
Frequency Range |
(60Hz) 57-63 Hz
(50Hz) 47-53
Hz |
|
Surge
Protection |
Meets ANSI
C62.41, Category A & B
EN 50091-2 and
EN50082-2 |
| Power Factor |
Powerware 9315 200-250kVA and
Powerware 9315 300-400kVA: 0.95 typical at full load
with optional input filter. Input current distortion
less than 7% typically with optional filter
Powerware 9315 500-625kVA: 0.85 lag at nominal
full load; 0.9 lag with input filter. Less than 12%
without input filter, less than 5% with optional input
filter |
|
Output
Specifications
|
|
Voltage
Regulation |
Better than +/-
1% |
|
Voltage THD |
(linear load): less than 3% for
a 100%
(linear load): 2% for a single harmonic
(non-linear load): less than 5% when tested in
accordance with EN50091-3 |
| Transient Response |
Less than 5%
for 100% load step; full recovery within 1 cycle |
| Frequency
|
(Free Run) +/- 0.005 Hz |
|
Frequency Sync Range |
+/- 0.5
Hz |
| Frequency Slew Rate |
1 Hz/second maximum |
|
Voltage adjustment range
(operator) |
+/- 0.5% |
|
Environment
Specifications
|
|
Ambient
temperature |
0C to 40C |
|
Storage |
-20C to +70C |
|
Relative
Humidity |
5-95%
non-condensing |
| Altitude |
1500 meters (5000ft.) at 40°C
ambient temperature without loading derating |
|
Audible
noise |
At 1 meter; in
accordance with ISO 7779
Powerware 9315 200-250kVA:
Less than 65 dBA
Powerware 9315 300-400kVA: Less
than 72 dBA
Powerware 9315 500-625kVA: Less than 75
dBA |
| Electrostatic discharge |
Withstands 25kV without damage
or disturbance to the load; exceeds requirements of IEC
801-2 EMC |
|
EMC |
Meets FCC Class
A and EN 50091-2 (CISPR 22, Class A) |
|
Battery
Specifications
|
|
Matching cabinets |
Remote option available |
|
Battery
Type |
Sealed,
valve-regulated lead acid |
|
Recharge
time |
10 -12 times
the discharge time to 95% |
|
Other battery options |
Wet cell and
nickel-cadmium, batteries; open racks available |
|
Safety
|
| Safety |
UL 1778 Listed
CUL CAN/CSA
C22.2 NO.107.1 Listed, EN
50091-1 |
